Thursday, October 17, 2019

How to Remove Small Dents From Your Car At Home – Ding Removing

One of those things about owning a car is dealing with the imperfections along the way. And some may say it builds the character of the car over time but others like to have their car in pristine condition mechanically and cosmetically.

Small dents are certainly common and should be expected, however, they can put a blemish on our day every time we see it. Even when others dont see it.

Its the dents that are small and subtle that make the glaze of the paint looks like a small iddy biddy ding you probably never really know how they get there. It could of been a small rock, pine cone and even someone was nasty enough to deface your car which can be even worse to fix.

What’s the cost of fixing small car dings

The cost of fixing a small dent on your car can range from $60 to $160 for a professional body shop to knock out the dings with specialized equipment. Could you imagine how much that would cost to pay a pro collision repair shop to remove all your little dents on your car? Its going to be super expensive.

But there are easier ways to remove small dings, bumps and dents from virtually any part without losing sleep over it. Whether it be a dent on the door, quarter panels, hood or trunk lid. There are some great home DIY ways to do this on the cheap without damaging your cars paint, or creating additional problems.

7 Ways To Remove Small Dents

If you are the hands-on kind of person who likes to DIY then here are 5 ways you can take out a dent on the cheap. As a friendly disclaimer that we advise utmost caution and this advice should be used for entertainment purposes and not a hard and fast rule to fix dents. Just be aware that if you are not carefull you make your dent problem worse.

Use a toilet plunger

Practical for the toilet when you clog it, but can be very effective for other purposes like removing small dents from your vehicle. However it must be known that this method only works with small dents that look like dumples in the paint, so any medium-size dents may not work as easy.

how to remove dents with a plunger

  1. Put water around the area where you plan to remove the dent from the panel, ideally for this to work the dent has to be on a flat surface.
  2. Use the plunger in an up and down motion until your dent has been successfully popped out.
  3. Be sure not to apply to much pressure onto the panel as it may cause more damage.

Remove dent with a hairdryer

With this method, you are using the power from drastic hot and cold which helps the metal of the dent expand and contract which can be a great solution to remove small and annoying dents. You are going to need a few things with this, you will need aluminum foil, rubber-coated gloved, dry ice and a can of compressed air and lastly a hairdryer.

  1. First you will want to locate the problem debt area and with the hairdryer, you should heat up the problem area and keep the hair dryer at least 6 inches away from the car panel you don’t want to burn the paint.
  2. Use the aluminum foil to cover the area and now its time to put on your rubber gloves to protect yourself from injury.
  3. Apply the dry ice over the foil thats been prepared over the dent
  4. If you have done everything right then the dent should easily pop out.

Dented Bumper Boiling Water Repair Trick

You may have seen this method all over facebook and youtube as its very effective and can some ties give you are scare when the debt finally pops out.

  1. If you are going to need to get a pot and boil some hot water to apply the hot water on the plastic bumper bar
  2. Once you have poured the hot water of the dented bumber then reach back from behind and push the dent out

Universal Dent Repair Kit – Rekoil Technology (Safest Option)

This is the easiest affordable way to remove dents any time you get one. It’s a small kit that allows you to pop out small and medium-sized dimple dents on your car. Its not free but its extremely affordable and can be used countless times over.

  1. First, get your universal dent repair kit here
  2. Allow the special suction and bracket over the problem area
  3. Unscrew the center suction cap and your dent will be popped out in seconds.

 

Before You Remove Your Next Car Dent

This is not a one-size-fits-all magic bullet solution because the truth is some small and dimple sized dings are easier than others. Its important to note that depending on the area of which the dent is located. Its going to heavily impact the success rate of that DIY job. However, if the dents you would like to remove are on the flat surfaces as mentioned you should have no problems using the above methods.

As a final thought, if you bought the Universal Dent repair kit that’s been trusted by drivers around the nation then, you could save money, time and the risk damaging your car further and you will be able to use it over and over again any time a dent occurs. Get your own universal dent repair kit here

 

 

The post How to Remove Small Dents From Your Car At Home – Ding Removing appeared first on Never Scratch Worlds Number #1 Scratch Repair.



from Never Scratch Worlds Number #1 Scratch Repair https://never-scratch.com/fix-dents/how-to-remove-small-dents-from-your-car-at-home-ding-removing/
via https://never-scratch.com